PCSOL 201
Controller for solar circuits
PCSOL 201 is a microprocessor controller with graphic display and TOUCH & PLAY operation system. It is intended for controlling solar circuits. Can be used with HIGH EFFICIENCY solar pumps controlled with PWM signal and volt-free H output.
FEATURES:
- PWM control of HIGH EFFICIENCY pump
- TOUCH & PLAY operating system
- Many solar schemes to choose
- Posibility to connect 4 temp. sensors PT 1000 (CT6-PT1000 and CT6W-PT1000 included)
- Turning off the heater when solar starts to work
- Function of pump stop after reaching max. temp. of the tank
- Function of heat drop after reaching max. temp. of the tank
- Time periodes for heater
- Intelligent alarm - identification of alarm situations
- Antifreeze function
- Calculation of recovered heat
- Visualization of recovered energy from the drain of the last days
| Measurement inputs (low voltage) |
4 temperature inputs |
|---|---|
| Other inputs/outputs (low voltage) |
Output (H) 5-6 V/0,1 A (DC) Output PWM for controlling the solar pump (only P1) |
| PWM freguency signal | 200 Hz |
| Signal level | 5 V |
| Digital | 5÷100% |
| High voltage outputs | Output P1, P2: 230 V/ max 0,5 A (AC) |
| Power supply | 230 V (AC), 50 Hz. I=1.02 A* |
| Load ability P1,P2 | not more than 0.5 A (AC)/output |
| Operating conditions | 0° ≤ Ta ≤ 40°C, humidity 10-90%, without condensation |
| Protection degree | IP 20 |
| Weight | 280 g |
| Dimensions [mm] | W-140 H-95 D-40 |
*Power intake only by controller is 0.02 A (1,5 W)